Libre setup

You should be able to download the ReStackor demo, double click the install file, enter the “ReStackor” password and run the demo.

However, there are numerous ways that gets messed up:

  • Incorrect file paths

  • No read/write access to the C:\ drive

  • Security disabled spreadsheet macros

Fixes for common setup problems are shown below.

Allow spreadsheet macros to execute

Shim ReStackor I/O and calculation results are loaded into the spreadsheet through macros. To allow macros to run they must be manually enabled when a spreadsheet is opened. Click on “Enable Macros” to allow the macros to run.

Some paranoid computer systems disable all macros without notification. To enable macros on those systems you have to go deeper into the menu system as shown further down in this HowTo.

Turn off link updating

LibreOffice spreadsheets update links when opened. That wipes out the data in the spreadsheet and loads any junk that is laying around from previous calculations. To prevent that from happening set:

     Tools/Options/LibreOffice Calc/General: and set “Update links when opening” to “Never”

File paths

The install directory for ReStackor must be C:\ReStackor. All  spreadsheet macros and I/O files are hardwired to work on that path. No other file path will work.

Once installed, the spreadsheets in C:\ReStackor\OpenOffice can be copied, renamed and run from any directory on the computer.

1: Shim ReStackor files must be installed on the C: drive at C:\ReStackor

Run from command prompt

Running ReStackor directly from a command prompt is the most direct method to diagnose problems. Missing directories, bad file formats or read/write access permissions will show up as error messages when run from the command prompt.

A ReStackor spreadsheet has to be run at least once to generate the C:\ReStackor\Work\Stack.in input file. If that file is missing the code won’t make it far as the first thing the code does is try and read that input file.

  1. Go to “Start Menu” and type “command prompt”
  2. Select “Command Prompt”
  3. cd C:\ReStackor\Code
    • Move to C:\ReStackor\Code working directory
  4. dir
    • List contents of directory
  5. restackor.exe
    • Run ReStackor calculations
2: Running from command prompt shows file access problems

File read/write access

The C:\ReStackor directory and all of the subdirectories and files need to have User read/write access. Virus scanners may disable access requiring permissions to be manually set.

To check for access permissions:

  1. Go to the C:\ReStackor directory in explorer
  2. Right click (not left) on the file or folder
  3. Select “Properties”
  4. Select “Security”
  5. Select “Authenticated Users”
  6. Set “Modify, Read & execute, List folder contents, Read and Write” to Allow
3: All files in the C:\ReStackor directory must have User read, write and execute permission

Enable spreadsheet macros

Shim ReStackor calculations and file I/O are loaded into the spreadsheet through macros. To allow the macros to run they must be manually enabled when a spreadsheet is opened.

Click on “Enable Macros” to allow the macros to run.

Some computer systems disable all macros with no prompt for optional permission. If the “Enable Macros” options does not appear when the spreadsheet is opened you have to go deeper in the menu system to enable macros.

  1. Click on “Tools”
  2. Click on “Options”
  3. Click on “LibreOffice”
  4. Click on “Security”
  5. Click on “Macro Security…”
  6. Click on “Medium”
4: LibreOffice menu path to enable spreadsheet macro execution

Europe Dot/Decimal

Shim ReStackor file I/O requires periods (.) for decimals and commas (,) for field separators. To setup Excel and Libre OpenOffice spreadsheets to use dots for decimals:

  1. Click on the start menu and type “control panel”
  2. Click on “Control Panel”
  3. Under “Clock and Region” select “Change date, time, or number formats”
  4. Click on “Additional settings…”
  5. Set “Decimal symbol:” to . (period)
  6. Set “List separator:” to , (comma)
5: Shim ReStackor calculations require dots for decimals and commas for field separators
Scroll to Top